Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Owens Corning Roof Repair in Fort Lauderdale: What to Know First
We repair Owens Corning roofs in Fort Lauderdale as an independent Owens Corning service provider, and most repairs are completed the same day we diagnose them. Asphalt shingle repairs on Owens Corning roofs here typically run $350 – $650, while flashing and leak repairs land between $250 – $800 depending on access and the extent of what Fort Lauderdale’s salt air and summer downpours have done. We quote a written price before any work starts. This page is for Owens Corning owners who need a straight answer: what failed, what it costs, and whether it’s worth repairing or replacing. Call (754) 732-9325 and Greg Holloway will walk your roof himself.

How Owens Corning Products Fail – and How We Fix Them
Owens Corning makes a solid shingle, but every roof in Fort Lauderdale eventually meets the same four enemies: UV, wind-driven rain, salt air, and heat that bakes attic spaces well past 130°F in August. Here’s what we actually see on Owens Corning roofs in this city, series by series:
- Duration Series granule loss along the rake edge. Duration shingles have a heavier granule embedment than most, but on Fort Lauderdale homes within a half-mile of the Intracoastal, salt spray accelerates surface erosion. You’ll see granules collecting in gutters first. The shingles themselves may still have years left, but once the granule layer thins, the asphalt underneath oxidizes fast. We repair this by replacing the affected shingles before the mat underneath gets brittle, which keeps the rest of the field intact.
- Oakridge shingle cracking at the nail line during wind events. Oakridge is a solid mid-tier shingle, but we’ve seen a pattern on Fort Lauderdale homes where original installers drove nails too high on the shingle, leaving the nail head exposed under the overlay. After a few seasons of thermal expansion and the occasional tropical-storm gust, the shingle flexes at that nail line and cracks. The fix is removing the cracked shingle, checking the nail pattern on the surrounding course, and reinstalling properly with the nail in the reinforced zone.
- Supreme 3-tab blow-offs along the gable end. Supreme is Owens Corning’s entry 3-tab line, and in Fort Lauderdale’s wind profile it’s the most common shingle we see lifted. The tabs are physically smaller than the architectural lines, so once the sealant strip ages past about twelve to fifteen years in this climate, the tabs lose their grip. We re-seal where the strip still holds, and replace individual tabs where it doesn’t. If the roof is shedding tabs across multiple slopes, we’ll tell you straight whether repair money is better spent toward a full replacement.
- TruDefinition Duration Storm nail pops along the decking seams. Nail pops happen on every brand, but we see them more on Duration Storm because these heavier shingles sit on homes where the original decking has shrunk slightly at the seams. The nail stays driven into old, expanded decking while the shingle settles with the new dimensions, and the head pushes back up through the shingle surface. We remove the raised nail, check the decking beneath, and re-secure with a longer fastener into solid wood. Leaving it alone means a pinhole leak every time it rains heavy, and Fort Lauderdale rain is nothing if not heavy.
- Vent boot and pipe collar failures on every Owens Corning roof over about fifteen years old. This one isn’t brand-specific to the shingle, but it’s the most common leak point we trace on Owens Corning roofs in Fort Lauderdale. The rubber collar around plumbing vents and the metal flashing at attic vents both degrade faster here due to UV and salt. Owens Corning’s shingles will be doing their job while water quietly follows a cracked boot under the shingle layer and into the ceiling. We replace boots and collars with quality aftermarket parts that meet or exceed the OEM spec, and we re-flash the surrounding shingle field so the repair stays watertight for the long haul.
Styles & brands we work with






Our Owens Corning Roof Repair Process
Every Owens Corning repair we handle follows the same sequence, because the homeowner should know what’s happening at each step and what it costs before we touch anything:
- 1
You call, a live person answers. No voicemail, no callback queue. You’ll reach someone at (754) 732-9325 who can schedule the visit, day or night.
- 2
Greg walks the roof and diagnoses in person. We don’t quote over photos. The failure mode tells us what went wrong, and the surrounding shingle field tells us what’s about to go wrong. On Owens Corning roofs, we inspect the sealant strips, the flashing points, and the condition of the underlayment at the eaves.
- 3
You get a written price before any work starts. The number covers the repair, the materials, and the cleanup. It does not change when the crew arrives. This is the Kingswell Way: say the price before the work, not after the surprise.
- 4
We decide on parts: OEM Owens Corning or quality aftermarket. For shingle replacements we match the existing Owens Corning product when it’s still in production and available. For flashing, boots, and ridge cap accessories, we use aftermarket parts that meet or exceed the OEM spec, because in many cases the aftermarket option is the better-built piece and it gets the roof watertight sooner.
- 5
The repair gets done, tested, and documented. We run water on the repair area before we come down. We photograph the work. We leave the property cleaner than we found it.
- 6
You get a written guarantee before the crew leaves. Not mailed later. If the repair fails inside the guarantee period, we return and correct it at no charge under our 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Owens Corning Roof Repair Costs in Fort Lauderdale
Here are the numbers we quote most often on Owens Corning roofs in Fort Lauderdale, so you know what to expect before you call:
- Single shingle replacement (wind or impact damage): $180 – $350, depending on roof pitch and whether we need to color-match a discontinued Owens Corning lot
- Localized leak repair (flashing, boot, or small valley issue): $250 – $600
- Flashing repair or replacement (chimney, wall, or skylight): $350 – $800
- Flat roof patch on an Owens Corning low-slope membrane: $400 – $900, depending on the size of the blistered or split area
- Vent boot replacement (single boot): $150 – $275
What moves the price: roof height and pitch, whether we need a second crew member for safety on steep sections, and the condition of the decking under the damaged shingles. If we find rotted decking, we’ll show you a photo and give you that number separately before we cut anything. Call (754) 732-9325 for an exact quote on your Owens Corning roof – the estimate is free, and the price is in your hands before any work starts.

Why Fort Lauderdale Homeowners Call Tilehurst Roofing Fort Lauderdale for Owens Corning Work
Most of the homeowners we work with have already been through a roof repair that failed within a year, or a contractor who never showed up. We built this company around the opposite approach. Every Owens Corning repair we do is covered by a written guarantee delivered before the crew leaves the property. If the repair fails inside the guarantee period, we return at no charge – that’s the 365-Day Done Right Promise, a full year of documented accountability on every job. Our technicians are background-checked, uniformed, and trained on Owens Corning’s product lines specifically, so when we show up to your Fort Lauderdale home, the person on your roof knows the difference between a sealant strip failure and a nail pop. And if your roof needs material we can’t source quickly in the Owens Corning line, we carry full access to GAF and CertainTeed products as well, along with four other manufacturers. We tell you the price before we touch your roof. That’s just how it should work.
FAQs
No, a properly done repair by a licensed contractor will not void the Owens Corning limited warranty on the remaining shingles. The warranty covers manufacturing defects in the shingles themselves, not labor, and it does not require that only Owens Corning-certified contractors touch the roof. What does matter is that the repair doesn’t damage surrounding shingles, and that’s why we use techniques that leave the adjacent Owens Corning field intact. Call (754) 732-9325 if you’d like us to inspect the repair area and give you a written quote.
We can match most Owens Corning colors that are still in production, including the most common Fort Lauderdale choices like Driftwood, Estate Gray, and Brownwood. If your shingle line or color has been discontinued, we’ll tell you that upfront and show you the closest available match before we install anything. The repaired area may be visible at first from certain angles, but a good color match and proper installation settle in within a season. Call (754) 732-9325 and we’ll check your specific Owens Corning color during the estimate.
Most leak repairs are completed the same day we diagnose them, or within 24 hours if we need to match a specific Owens Corning shingle lot that isn’t on hand. Fort Lauderdale’s afternoon storms don’t wait, and neither do we – we keep the most common Owens Corning repair materials in stock so we’re not leaving a tarp on your roof while we chase a supplier. Call (754) 732-9325 and we’ll get someone out to look at the leak.
Repair is the right call when the shingle field is sound and the problem is localized: a flashing point, a vent boot, a handful of shingles. Replacement is the honest recommendation when the shingles are brittle or granule-bare across multiple slopes, or when you’ve had repeated leaks from different areas in the same season. We’ll tell you which one applies to your roof and give you a written price for either path before any work begins. Call (754) 732-9325 for a free estimate on either option.
For shingle replacements, yes – we use genuine Owens Corning shingles matched to your existing roof whenever the product line is still available. For accessories like vent boots, ridge cap, and flashing, we use quality aftermarket parts that meet or exceed the OEM specification, because in several categories the aftermarket part is simply built better and lasts longer in Fort Lauderdale’s salt air and UV. We’ll show you exactly what we’re installing and why before we install it. Call (754) 732-9325 to schedule your free estimate.
Written by Greg Holloway, Owner, Tilehurst Roofing Fort Lauderdale at Tilehurst Roofing Fort Lauderdale, serving Fort Lauderdale and nearby areas.