A Tilehurst company - serving Fort Lauderdale, FL

Valley Repair in Fort Lauderdale, FL

Tile roofingTile roofing
Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate
Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Valley Repair in Fort Lauderdale, FL

Valley repair fixes the V-shaped channels where two roof slopes meet, the spots that collect Fort Lauderdale’s heaviest rainfall and funnel it toward your gutters. Most valley repairs in this area run $450 – $1,200 depending on whether we’re replacing metal Flashing Repair, re-sealing shingles, or rebuilding rotted decking underneath. We’re Tilehurst Roofing Fort Lauderdale, and if your valley is leaking, call us at (754) 732-9325 for a free estimate and a written price before any work begins.

Valleys are the workhorses of a South Florida roof. During a typical Fort Lauderdale summer storm, a single valley can channel hundreds of gallons of water in minutes. When the flashing corrodes, the shingles lift, or the underlayment beneath gives out, water finds its way into your attic and eventually your ceilings. We handle valley repair as a core part of our Roof Repair in Fort Lauderdale service because nearly every leak we’re called out for traces back to either a valley, a penetration, or flashing failure.

Greg Holloway leads our crew, and he’s walked more Fort Lauderdale valleys than he can count. Our approach is simple: diagnose the valley properly, show you what’s wrong, give you a written price, and fix it so it stays fixed. If it doesn’t, we come back. That’s the Tilehurst way, and it’s been that way since Kingswell founded the family of companies in 2000.

When You Need Valley Repair

Fort Lauderdale homeowners usually don’t notice valley failure until water is already inside. Here’s what typically sends people to the phone:

  • Water stains on ceilings near exterior walls. Valleys sit at roof intersections, and leaks from them often show up as brown rings or streaks on ceilings in corners of upstairs rooms. In neighborhoods like Coral Ridge, Rio Vista, and Victoria Park, we see this pattern most often after sustained afternoon downpours.
  • Granules collecting in gutters below a valley. As valley shingles wear, the protective granules slough off and wash straight down. If your gutters keep filling with grit in one spot after every storm, the valley above is degrading.
  • Curled, cracked, or missing shingles in the valley line. The angled cuts along a valley are the weakest shingle points on your roof. Wind and water work them loose faster than field shingles.
  • Rust streaks or visible corrosion on valley flashing. Metal valley flashing in coastal Fort Lauderdale air takes a beating from salt and humidity. Once rust sets in, pinholes form and water seeps through.
  • Damp attic insulation or daylight visible through the roof deck. If you can see light from inside your attic where the roof planes meet, the valley has separated and water is getting in.
  • Recurring leaks that “come back” after a previous repair. Many valley repairs fail because the contractor patched shingles but didn’t address the flashing or underlayment underneath. We’re called out regularly to redo work that lasted months, not years.

One thing to know: valleys are not a place for a quick patch. If water has been getting in for a while, what looks like a small shingle problem usually means rotted decking underneath. That’s the actual cost driver, and we’ll show you exactly what we find before we touch anything.

Our Valley Repair Process

Every valley repair we do in Fort Lauderdale follows the same steps, and you’ll know the price before we start:

  1. We inspect the valley from top to bottom. Greg or one of our techs walks the roof, lifts the shingles along the valley line, checks the flashing, and probes the decking beneath. We document what we find with photos so you can see it too.
  2. We write the price down and hand it to you. No verbal quotes, no “we’ll see how it goes.” The written price covers everything we’re about to do, materials included. If we discover more damage during the work, we stop and get your sign-off before going further.
  3. We strip the damaged valley section. Old shingles, failed underlayment, and corroded flashing come out. We remove enough material on both slopes to expose clean, solid decking.
  4. We replace or repair the decking as needed. If the plywood beneath is soft or rotted, we cut it out and install new decking. This is the step that separates a valley repair that lasts from one that fails within a year.
  5. We install new underlayment and flashing. We lay fresh underlayment through the valley and install new metal flashing or woven shingles depending on your roof’s design and material. If you have architectural shingles, we match them; if you’re thinking about a different product, we can source from CertainTeed, Owens Corning, IKO, Atlas, and others.
  6. We re-shingle, seal, and clean up. The valley gets new shingles cut and fitted correctly, all penetrations get sealed, and we leave your property cleaner than we found it. Before our crew leaves, you get the written guarantee in your hand.

Every valley repair carries our 365-Day Done Right Promise. If the repair fails inside a full year, we return at no charge. That’s in writing, not a verbal assurance.

Valley Repair Pricing in Fort Lauderdale

You should know what a valley repair costs before you call us. Here are honest ranges based on what we’ve seen across Fort Lauderdale, from Sailboat Bend to Lake Ridge:

Repair Type Typical Cost What It Includes
Valley flashing replacement $450 – $700 Removing old metal, installing new flashing, resealing shingles
Valley shingle replacement (one side) $500 – $850 Stripping damaged shingles, new underlayment, re-shingling the valley line
Full valley rebuild (both sides, decking repair) $900 – $1,200 Complete tear-out, decking replacement as needed, new flashing, new shingles
Decking replacement (per 4×8 sheet) $85 – $120 per sheet Added to the above when plywood is rotten

What drives the price is mostly the condition of the decking underneath. Salt air, humidity, and years of minor seepage rot plywood faster than most homeowners realize. If we open up a valley and find solid decking, you’re looking at the lower end. If the wood is soft, the price moves up, and we’ll show you the damage before we replace it.

Material choice matters too. Basic dimensional shingles are the most affordable. Architectural shingles from CertainTeed or Atlas run a bit more but look sharper and shed water better through deep valleys. We’ll walk you through your options without any pressure to upgrade. The written price includes everything, and there’s nothing extra at the end.

Estimates are free. Call (754) 732-9325 and we’ll schedule a time that works for you. A live person answers the phone, any time of day, any day of the week.

FAQs – Valley Repair

How much does valley repair cost in Fort Lauderdale?

Most valley repairs in Fort Lauderdale cost between $450 and $1,200, depending on whether the flashing needs replacing, shingles need to be rebuilt, or the decking underneath has rotted. This is just one of our Roof Repair services. You’ll get a written price before any work starts, so there’s no surprise at the end. Call (754) 732-9325 for a free estimate.

How long does a valley repair take?

A typical valley repair takes 4 – 8 hours, which means most jobs are done same-day. If decking replacement is needed or the weather turns, it may stretch into a second morning. We’ll tell you the expected timeline when we hand you the written estimate.

Can you repair a valley leak the same day?

Yes, in most cases we can get to a valley leak the same day or within 24 hours, especially if water is actively entering your home. Call (754) 732-9325 and a live person will get you on the schedule right away, evenings and weekends included.

Is it cheaper to repair a valley or replace the whole roof?

If the valley is the only problem area, repairing it is dramatically cheaper than a full roof replacement. Valley repair runs $450 – $1,200, while a full Fort Lauderdale re-roof starts several times that. However, if your roof is over 20 years old or multiple valleys are failing, a Flat Roof Patch or full replacement may be the smarter long-term move. We’ll give you an honest recommendation either way, and the repair quote is always free.

If you’ve found water where it shouldn’t be, or you suspect your valley is the culprit, call us now. Greg and the Tilehurst Roofing Fort Lauderdale team will sort it out. The estimate is free, the price is written down before we begin, and every repair carries a written one-year guarantee. Call (754) 732-9325.

Written by Greg Holloway, Owner at Tilehurst Roofing Fort Lauderdale, serving Fort Lauderdale.

Need Roofing help in Fort Lauderdale? Licensed & insured · Free on-site estimates response · free estimates
Call (754) 732-9325
Local Service Coverage

Request a Free Estimate in Fort Lauderdale

Tell us what you need - Tilehurst Roofing Fort Lauderdale responds fast. No obligation.

When you submit this form, you agree to the terms of our Privacy Policy and consent to receive communications by telephone, text message, or email about your service request, including from the local pros who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch