Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Gutter Replacement: The Fort Lauderdale Owner’s Guide
Boral gutter replacement in Fort Lauderdale typically runs $12 to $28 per linear foot installed, so a standard 150-foot home falls between $1,800 and $4,200 depending on the gutter profile and whether fascia repair is needed. We stock Boral-compatible aluminum and steel gutter profiles on our trucks and can usually complete a full replacement in a day. Most owners discover the failure the hard way: a sagging run pulling away from the fascia, water spilling over the front edge during a summer downpour, or a rusted-through section that’s been quietly rotting the fascia board behind it for months. By the time you see the stain on the soffit, the damage underneath is usually worse than the gutter itself.

Which Boral Models This Applies To
Boral doesn’t manufacture a proprietary gutter line the way it does roof tile, so what you’re replacing is the gutter system installed alongside or beneath Boral roofing products. The compatibility question is less about matching a Boral model number and more about matching the gutter profile, material gauge, and hanger style your home already has. Boral tile roofs in Fort Lauderdale are heavy, and the gutter system underneath has to handle both the weight of water coming off tile and the seasonal leaf load from oaks, palms, and sea grapes.
The practical way to identify what you have: measure the gutter’s top opening (5-inch K-style and 6-inch half-round are the most common in Fort Lauderdale), check the material (aluminum at .027 or .032 gauge, galvanized steel, or copper), and look at the hanger type (hidden brackets, spike-and-ferrule, or strap hangers). If your Boral roof has a tile overhang that dumps water past the gutter’s front lip, you’ll need a wider profile or a tile diverter installed at the same time. We’ll tell you exactly what you’re looking at before we quote, and we always show you the measurement. Tilehurst Roofing Fort Lauderdale is an independent local service provider, not affiliated with Boral, so our recommendation is based on what actually works on your roofline, not a brand loyalty pitch.
Styles & brands we work with






Signs Your Boral Gutter Replacement Is Failing
- Water spilling over the front edge during normal rain. This usually means the gutter is undersized for the tile’s drainage pattern, or the pitch has flattened over time. On Boral tile roofs around Fort Lauderdale, we often see gutters that were never re-pitched after the tile settled.
- Visible gaps between the gutter and the fascia board. The hidden hangers have pulled loose, often because the original installer screwed into rotted wood instead of solid fascia. Once a gutter starts pulling away, the weight of standing water makes it worse every week.
- Rust streaks or pin-hole leaks on the gutter’s interior face. Fort Lauderdale’s salt air accelerates corrosion on thin-gauge steel. A pinhole today is a split seam within a year, and by then the fascia behind it is already wet.
- Sagging sections that hold standing water between downspouts. The pitch has failed or the hanger spacing was too wide from day one. Standing water breeds mosquitoes and adds weight the brackets weren’t designed to carry.
- Downspouts pulling away from the wall or discharging at the foundation. The downspout straps have corroded or the buried line is clogged. Water dumping at the slab edge is how you get foundation settlement and termite activity in South Florida.
Replacement Cost & What’s Included
For a typical Fort Lauderdale single-story home with Boral roofing, you’re looking at these installed ranges:
- 5-inch aluminum K-style: $12 to $18 per linear foot
- 6-inch aluminum half-round: $18 to $26 per linear foot
- Copper (rare, usually on historic Las Olas homes): $30 to $45 per linear foot
- Fascia board replacement (if rotted): $8 to $14 per linear foot, added only where needed
- Downspout replacement: $75 to $150 per drop, including elbows and straps
Every quote from Tilehurst Roofing Fort Lauderdale is a written line-item price before any work starts. That means you see the gutter material cost, hanger cost, labor, and any fascia repair as separate numbers. No change orders appear at the door. The 365-Day Done Right Promise covers every gutter replacement we install: if it sags, leaks, or pulls away within a year, Greg Holloway’s crew returns to fix it at no charge. The guarantee is in writing before we leave your driveway.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely inspect your gutters from the ground with binoculars: look for sagging, gaps at the fascia, rust streaks, and water-stained soffits. Cleaning leaves from a single-story gutter with a proper ladder is also reasonable for a careful homeowner. What you should not do is attempt a full gutter replacement on a Boral tile roof without experience: the tile overhang creates tight clearances, the old hangers are often corroded into the fascia, and a dropped section of gutter can pull tile loose on the way down. Fort Lauderdale afternoon thunderstorms also turn a ladder job dangerous fast. If you’re unsure what you’re looking at, call (754) 732-9325 and we’ll walk the roof with you and give you a straight number before we touch anything. We tell you the price before we touch your roof. That’s just how it should work.
FAQs
Aluminum gutters in Fort Lauderdale’s salt air typically last 12 to 18 years, while galvanized steel runs 8 to 12 years. Homes closer to the Intracoastal or the ocean, including much of the Las Olas Isles, fall toward the shorter end because salt spray accelerates corrosion at the seams and hanger points. Call (754) 732-9325 and we’ll inspect yours and tell you honestly how much life is left, for free.
Yes, if the damage is localized: a single split seam, a few pulled hangers, or one rusted section can be repaired for $200 to $500 in most cases. The repair only makes sense if the rest of the run is structurally sound. Once you have gaps at the fascia in multiple spots or rust through the interior face, patching is throwing money at a system that’s already failing. Call (754) 732-9325 for an honest assessment before you spend anything.
For a standard single-story home, a full gutter replacement takes one day, including tear-off, fascia inspection, new hangers, gutters, and downspouts. Two-story homes or replacements with copper or fascia rebuild may run two days. We’ll give you a written completion window before the crew starts.
We stock 5-inch and 6-inch aluminum K-style and half-round gutter profiles on our trucks in Fort Lauderdale, so most replacements happen same-day or next-day once the quote is approved. Custom colors and copper are special order, usually a 5 to 10 business day lead time. Call (754) 732-9325 for a free estimate and we’ll tell you exactly what’s available for your home.
Contact Tilehurst Roofing Fort Lauderdale
If your Boral gutters are sagging, leaking, or pulling away from the fascia, don’t wait for the next heavy rain to find out what’s already wrong. Call (754) 732-9325 and Greg Holloway or one of his crew will answer in person, walk your roofline, and put a written price in your hands before any work starts. We show up when we say we will, leave your property cleaner than we found it, and stand behind every gutter we install for a full year under the 365-Day Done Right Promise. Free estimates, no pressure, and a live person on the phone every time you call.
Written by Greg Holloway, Owner, Tilehurst Roofing Fort Lauderdale at Tilehurst Roofing Fort Lauderdale, serving Fort Lauderdale and nearby areas.