Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Roof Replacement in Fort Lauderdale: What to Know First
Boral roof replacement in Fort Lauderdale typically runs $14,000 to $38,000 for a complete tile roof on an average single-family home, and most jobs take five to eight working days once materials land. Tilehurst Roofing Fort Lauderdale is an independent Boral service provider, not a factory-authorized dealer, which means we work for you when the warranty conversation gets complicated. We tell you the price before we touch your roof. That’s just how it should work. This page is for Fort Lauderdale homeowners who own a Boral roof that has reached the end of its service life, or whose Boral roof failed early and now needs a replacement decision made without pressure. If your Boral roof is leaking, cracking, or simply past its years, call (754) 732-9325 and ask for Greg Holloway. He walks every Boral roof himself before a number ever leaves his mouth.

Key Takeaways
- Boral tile roofs in Fort Lauderdale last 40 to 70 years, but the underlayment beneath them fails much sooner, usually at the 20 to 25 year mark.
- Full replacement cost depends on whether the existing tile can be salvaged, the underlayment condition, and whether you choose Boral concrete or Boral clay.
- We provide written line-item pricing before any work begins, and a one-year written guarantee on the entire replacement under the 365-Day Done Right Promise.
- Parts for older Boral lines, especially Boral ClayMax and Boral Villa, can take three to six weeks to source in South Florida.
- Call (754) 732-9325 for a free estimate. A live person answers, day or night.
Styles & brands we work with






How Boral Products Fail – and How We Fix Them
Boral makes a genuinely strong tile. But every roof fails eventually, and in Fort Lauderdale’s salt air, heat, and summer downpours, the failure often shows up in predictable ways. Here’s what we see on Boral roofs across the city:
- Underlayment breakdown beneath Boral concrete tile. The tile itself can look fine while the felt or synthetic underlayment underneath has turned to powder. Fort Lauderdale’s UV load and humidity cycles dry out older felt underlayment faster than Boral’s own literature suggests. On Boral Capistrano and Boral Barcelona roofs we replace, we commonly find the underlayment failed a decade before the tile did. The fix is a full lift-and-relay: remove tile, replace underlayment, reinstall the good tile.
- Boral Villa clay tile spalling at the corners. Boral Villa clay tiles, popular on Las Olas Isles homes from the 1980s and 1990s, absorb moisture through micro-cracks in the glaze. When the sun bakes them, the trapped moisture expands and pops the corner off the tile. You’ll see small clay fragments in the gutter. Once spalling starts, individual tile replacement becomes a losing game. We recommend planning a full replacement when more than 15% of the field shows spalling.
- Boral ClayMax color fade and surface erosion. ClayMax tiles are beautiful when new, but the color coat does not bond as deeply as the clay body. After 15 to 20 years in direct South Florida sun, the color washes out unevenly, leaving a patchy, gray-brown roof. Structurally the tiles are still sound, but homeowners often choose replacement for curb appeal alone. If the tile is intact, we can also discuss a lift-and-recoat option, though we’ll tell you straight that it rarely looks factory-fresh.
- Broken Boral roof tile from foot traffic and storm debris. Hurricane season in Fort Lauderdale sends tree limbs, coconuts, and neighbor’s patio furniture onto roofs. Boral tile is impact-rated, but a direct hit from a coconut or a branch at the ridge line will crack it. Cracked tiles let water reach the underlayment, and once the underlayment is compromised, rot follows. We inspect every tile after a storm and replace broken pieces. If the underlayment is already aged, we’ll be honest that patching tiles is a stopgap, not a fix.
- Ridge cap mortar failure on Boral barrel tile roofs. The mortar that holds ridge caps in place breaks down after 20 to 25 years of Fort Lauderdale heat and rain. Once the mortar crumbles, water runs straight into the roof at the ridge line. We see this on Boral Barcelona and Boral Mission barrel profiles regularly. A ridge cap rebuild is sometimes a repair; if the underlayment beneath has been getting wet for multiple seasons, replacement of the whole roof becomes the fiscally sane choice.
Our Boral Roof Replacement Process
Here’s how a Boral replacement with Tilehurst Roofing Fort Lauderdale actually goes, step by step:
- 1
Walk-through and roof inspection. Greg Holloway walks the roof himself, checks the underlayment condition (we lift tiles in three or four test areas), inspects the decking, and photographs everything. You get a full report with photos, not a verbal summary.
- 2
Written line-item price. You receive a written price for the full replacement before any work starts. If we can salvage your existing Boral tile and relay it, that price is lower than a full new-tile quote. Both numbers are in writing, with no change orders unless you change the scope.
- 3
Parts decision: OEM Boral vs. quality aftermarket. If we’re replacing tile rather than relaying, we’ll walk you through the Boral lines still in production versus aftermarket tile from manufacturers who match Boral’s profiles. OEM Boral tile runs more per square foot, but it carries the Boral warranty. Aftermarket tile can save 15 to 25%, but it won’t be warrantied by Boral. We give you both numbers and let you decide.
- 4
Tear-off and decking inspection. We remove old tile and underlayment, inspect the decking, and replace any rotted or water-damaged sheathing. In Fort Lauderdale, we always check the drip edge and fascia for salt corrosion while we’re in there.
- 5
Underlayment installation and tile set. New synthetic underlayment goes down first, then the tile is set with fasteners matched to the Fort Lauderdale wind zone. We install new ridge caps, flashings, and valley metal. The crew leaves the property cleaner than they found it, following the Kingswell Way on every job.
- 6
Final inspection and written guarantee. Greg walks the finished roof with you, answers questions, and hands you the written guarantee before the crew rolls out. The 365-Day Done Right Promise covers the entire job for a full year. If anything is not right, we come back and fix it at no charge.
See the difference
Before
After
Before
After
Before
AfterWhat Boral Roof Replacement Costs in Fort Lauderdale
Here are the numbers we quote most often for Boral work in Fort Lauderdale:
- Full tear-off and new Boral concrete tile replacement: $16,000 to $32,000 for a typical 2,000 to 3,000 square foot single-family home.
- Lift-and-relay same Boral tile with new underlayment: $9,000 to $16,000, depending on tile condition and the number of broken pieces that need replacing.
- Full tear-off and new Boral clay tile (ClayMax, Villa, or Mission): $24,000 to $45,000. Clay is steeper because the material itself is more expensive and slower to install.
- Boral ridge cap rebuild only (repair, not replacement): $2,500 to $5,500 depending on linear feet of ridge and mortar condition.
What moves the price: the square footage, the tile profile (flat vs. barrel), whether we can reuse your existing tile, how much decking needs replacing, and whether your home is one story or two. Two-story Fort Lauderdale homes run higher because of setup and staging time. Call (754) 732-9325 for an exact quote. Estimates are free, and the number we give you is the number you’ll pay.
Why Fort Lauderdale Homeowners Call Tilehurst Roofing Fort Lauderdale for Boral Work
Most of the Boral owners who call us have already had a bad experience somewhere else. A no-show. A price change at the door. A repair that leaked again within a month. That’s exactly why Tilehurst Roofing Fort Lauderdale operates the way it does. We answer the phone live, 24/7, with no voicemail queue. We give you a written price before any work starts, every single time. Our technicians are background-checked and uniformed, so you know who is on your roof. And we know Boral tile well enough to tell you honestly whether a repair makes sense or whether replacement is the only responsible move. If your Boral roof is beyond its years but you’re weighing other brands, we also install GAF, Owens Corning, and CertainTeed asphalt and architectural shingles, so you get a genuine comparison, not a sales script. The 365-Day Done Right Promise means if it’s not done right, we make it right. For a full year. In writing. That’s the guarantee Greg Holloway signs his name to on every Boral job we take.

FAQs
As an independent Boral service provider, we service Boral roofs regardless of warranty status, but we do not process warranty claims on Boral’s behalf. If your Boral material is still under the manufacturer’s warranty, we’ll document the failure thoroughly and help you file the claim yourself. We’ll tell you what the warranty will likely cover and what it won’t before you spend a dollar with us. Call (754) 732-9325 and we’ll walk you through it.
Yes, we replace individual Boral tiles all the time, but only when the underlayment beneath them is still sound. A broken tile on a five-year-old roof is a repair. A broken tile on a 25-year-old Fort Lauderdale roof with original underlayment is usually the first sign that replacement is closer than you think. We’ll show you the underlayment condition with photos from your own roof, and you decide. Call (754) 732-9325 for an inspection.
Most Boral replacements in Fort Lauderdale take five to eight working days once materials are on site. The variable is materials: OEM Boral tile can take three to six weeks to arrive, depending on the line and color. If you choose a quality aftermarket tile, that window usually shrinks to one to two weeks. We’ll lay out the timeline in writing before you commit.
Both hold up well in Fort Lauderdale’s climate, but they fail differently. Boral concrete tile is heavier, more impact-resistant, and generally less expensive. Boral clay tile is lighter, holds its color longer in direct sun, and costs more per square foot. Clay handles salt air marginally better over decades. Concrete handles hurricane debris better. We recommend based on your specific roof structure and budget, not on what’s in our warehouse.
That depends entirely on your HOA’s covenants. Many Fort Lauderdale HOAs, especially in gated communities and on the waterways, specify a particular tile profile and sometimes a specific manufacturer. We’ll give you the spec sheet for any aftermarket tile we propose, and you can run it past your HOA board. If the HOA requires OEM Boral, we’ll quote OEM Boral. No games. Call (754) 732-9325 if you’d like us to walk you through the approval question.
Call for a Free Boral Roof Replacement Estimate in Fort Lauderdale
If your Boral roof is leaking, aging, or just looking tired, call (754) 732-9325 and ask for Greg. We’ll schedule a walk-through, inspect the roof from the decking up, and give you a written price before any work starts. A live person answers the phone now, tonight, and this weekend. No voicemail, no callback queue, no pressure. Just a straight number from someone who actually stood on your roof.
Written by Greg Holloway, Owner, Tilehurst Roofing Fort Lauderdale at Tilehurst Roofing Fort Lauderdale, serving Fort Lauderdale and nearby areas.