Owens Corning Roofing Company Nationwide

Owens Corning Roofing Company in Fort Lauderdale: What to Know First

We’re an independent Owens Corning roofing company in Fort Lauderdale, and we repair and replace Owens Corning roofs without the manufacturer-run-service runaround. Most Owens Corning repair jobs in Fort Lauderdale take one to two days once we’ve walked the roof and priced the work. You’ll have a written price in your hands before any work starts, not after we’ve pulled shingles off. For a free estimate on Owens Corning roof repair or replacement in Fort Lauderdale, call (754) 732-9325.

Call (754) 732-9325

This page is for homeowners who already own an Owens Corning roof or are considering one and want to know what it actually takes to keep it watertight in South Florida’s salt air, hurricanes, and afternoon downpours. If you’ve been burned by a no-show contractor or a repair that failed within months, you’re exactly who we built Tilehurst Roofing Fort Lauderdale for.

Key Takeaways

• We service all major Owens Corning shingle lines including Duration, Oakridge, and Berkshire.
• Every Owens Corning repair gets a written guarantee before the crew leaves.
• We carry GAF, CertainTeed, IKO, Atlas, Tamko, and Boral as backups so you’re never locked into one product.
• Greg Holloway walks every Fort Lauderdale roof himself before a price is quoted.

How Owens Corning Products Fail – and How We Fix Them

Owens Corning makes a solid shingle. But Fort Lauderdale is not a gentle place for any roof, and certain Owens Corning lines have failure patterns we see over and over. Here’s what we find most often:

• Duration Series granule loss and premature balding. Duration is Owens Corning’s most popular architectural shingle, and it’s a good product. But in Fort Lauderdale, intense UV combined with salt air can accelerate granule loss on roofs that are under-ventilated. We see bald patches on the western-facing slopes most often. The fix is usually targeted shingle replacement with proper attic ventilation correction, not a full reroof.
• Oakridge line sealant strip failure at the eaves. The Oakridge series uses a thermal sealant that should bond shingles together after installation. In Fort Lauderdale’s humidity swings, we occasionally find sealant strips that never fully activated during installation, especially on roofs done in cooler months. Shingles lift at the rake edges and wind-driven rain gets underneath. We reseal or replace the affected shingles and verify the bond before we leave.
• Berkshire impact-rated shingle cracking on older installs. Berkshire is a heavier, impact-rated product that handles hail well, but on Fort Lauderdale homes built before about 2005, the decking underneath may flex more than the shingle allows. That flex creates hairline cracks at the nail line. We replace cracked shingles and reinforce the decking underneath rather than just patching the surface.
• Flashing failures at sidewalls and chimneys on Owens Corning roofs. This isn’t unique to Owens Corning, but it’s the most common leak point we fix on Owens Corning roofs in Fort Lauderdale. Original installers often used exposed galvanized flashing instead of aluminum or copper, and salt air eats galvanized in a few years. We pull the old flashing, install proper aluminum or copper step flashing, and re-bed the shingles around it.
• Algae streaking that hides actual damage. Fort Lauderdale’s humidity grows algae on most asphalt shingles, including Owens Corning. The black streaks are cosmetic, but they make it hard to see real damage like granule loss or cracking. We soft-wash the area, then walk the clean roof to find what’s actually failing underneath.

Our Owens Corning Roofing Company Process

Here’s how a typical Owens Corning repair or replacement goes with Tilehurst Roofing Fort Lauderdale, from first call to cleanup:

1. 1
   You call (754) 732-9325. A live person answers, day or night. We schedule a time that works for you, and we show up in that window.
2. 2
   Greg or a senior tech walks the roof. We don’t quote from the driveway. We go up, inspect the Owens Corning shingles, decking, flashing, and underlayment, and document everything with photos.
3. 3
   You get a written price. Before any work starts, you have a line-item price in your hands. No change orders at the door, no “we found more damage” surprises without a conversation and your approval first.
4. 4
   We decide on parts together. For Owens Corning repairs, we use OEM shingles whenever color and availability allow. For underlayment, drip edge, and flashing, we’ll recommend the best product for Fort Lauderdale’s salt air, not just the cheapest thing on the truck.
5. 5
   We do the work and test it. For repairs, we water-test the area after installation. For replacements, we inspect every seam, nail line, and ridge cap before we call it done.
6. 6
   You get a written guarantee, and we clean up. The guarantee is in writing before the crew leaves. The work area is cleaner than we found it. That’s the Kingswell Way.

What Owens Corning Roofing Company Costs in Fort Lauderdale

Here’s what Owens Corning work typically runs in Fort Lauderdale as of 2026. These are real ranges, not teaser numbers:

• Small shingle repair (10-15 shingles, no decking damage): $350 – $650
• Flashing replacement at one chimney or sidewall: $400 – $900
• Ridge cap replacement on a typical Fort Lauderdale ranch: $450 – $1,100
• Full Owens Corning Duration reroof (1,800 – 2,200 sq ft home): $11,000 – $18,000 depending on decking condition, pitch, and tear-off requirements
• Roof inspection with written report and photos: $150 – $300, credited toward any repair we do within 30 days

What moves the price: decking rot from years of slow leaks, the roof’s pitch (steep Fort Lauderdale tile roofs cost more labor), and whether the existing underlayment meets current code. We tell you the price before we touch your roof. That’s just how it should work. Call (754) 732-9325 for an exact quote on your Owens Corning roof.

Why Fort Lauderdale Homeowners Call Tilehurst Roofing Fort Lauderdale for Owens Corning Work

Most roofing companies in Fort Lauderdale will say they work on Owens Corning roofs. Few actually know the difference between a Duration and an Oakridge, or why a sealant strip failed at the eaves on your specific house. Greg Holloway grew up in Los Angeles, learned roofing through the construction trades program at Los Angeles Trade-Technical College, and has spent the better part of three decades working roofs from the ground up. He walks every Fort Lauderdale roof himself, including the flat roofs and tile work along Las Olas Isles where salt air and summer rain demand more from every material and every fastener.

We also carry six other major manufacturers: GAF, CertainTeed, IKO, Atlas, Tamko, and Boral. If an Owens Corning product is backordered or discontinued, we’re not stuck. You get the right material for your home, not just what happens to be on our truck. Every repair carries our 365-Day Done Right Promise. If it’s not done right, we come back and make it right for a full year, at no charge.

FAQs